Running SMB/CIFS from a normal user account

On Unix-like systems such as Linux and Solaris, the default SkyVault setup must be run using the root user account so that the CIFS server can bind to the privileged ports (TCP 139/445 UDP 137/138).

1. If you are running on Mac OS X 10.10 (Yosemite) or later, set up the pf firewall to forward to the non-privileged TCP 1139/1445 ports. You will need admin rights to perform these actions:
   1. In the /etc directory, locate the pf.conf file and the pf.anchors folder.

      Take a copy of the pf.conf file and rename it as pf-alfresco-cifs.conf.

   2. Add the following code to the pf-alfresco-cifs.conf file:

      rdr-anchor “alfresco-forwarding"
      load anchor "alfresco-forwarding" from "/etc/pf.anchors/alfresco.cifs.forwarding"

   3. Create a new file in the /etc/pf.anchors folder called SkyVault.cifs.forwarding and add the following code:

      rdr pass on en0 inet proto tcp from any to any port 445 -> 127.0.0.1 port 1445 
      rdr pass on en0 inet proto tcp from any to any port 139 -> 127.0.0.1 port 1139

   4. Add the following code to the end of the pf.conf file:

      rdr-anchor “alfresco-forwarding"
      load anchor "alfresco-forwarding" from "/etc/pf.anchors/alfresco.cifs.forwarding"

   5. Enable port forwarding using this command:

      pfctl -ef /etc/pf-alfresco-cifs.conf

2. For other platforms, configure the CIFS server to use non-privileged ports, use the following property settings:

   cifs.tcpipSMB.port=1445
   cifs.netBIOSSMB.namePort=1137
   cifs.netBIOSSMB.datagramPort=1138
   cifs.netBIOSSMB.sessionPort=1139

   Other port numbers can be used but must be above 1024 to be in the non-privileged range.
   Set up the firewall rules to forward requests:

   • TCP ports 139/445 to TCP 1139/1445
   • UDP ports 137/138 to UDP 1137/1138
3. On Mac OS X 10.9 and earlier, use these commands:

   sysctl -w net.inet.ip.fw.enable=1
   sysctl -w net.inet.ip.forwarding=1
   sysctl -w net.inet.ip.fw.verbose=1
   sysctl -w net.inet.ip.fw.debug=0
   ipfw flush
   ipfw add 100 allow ip from any to any via lo0
   # Forward native SMB and NetBIOS sessions to non-privileged ports
   ipfw add 200 fwd <local-ip>,1445 tcp from any to me dst-port 445
   ipfw add 300 fwd <local-ip>,1139 tcp from any to me dst-port 139
   # Forward NetBIOS datagrams to non-privileged ports (does not currently work)
   ipfw add 400 fwd <local-ip>,1137 udp from any to me dst-port 137
   ipfw add 500 fwd <local-ip>,1138 udp from any to me dst-port 138

   Replace <local-ip> with the IP address of the server that SkyVault is running on.
4. On Linux, you can use the following commands to get started, but be aware these commands will delete all existing firewall and NAT rules and could be a security risk:

   echo 1 > /proc/sys/net/ipv4/ip_forward
   modprobe iptable_nat
   iptables -F
   iptables -t nat -F
   iptables -P INPUT ACCEPT
   iptables -P FORWARD ACCEPT
   iptables -P OUTPUT ACCEPT
   iptables -t nat -A PREROUTING -p tcp --dport 445 -j REDIRECT --to-ports 1445
   iptables -t nat -A PREROUTING -p tcp --dport 139 -j REDIRECT --to-ports 1139
   iptables -t nat -A PREROUTING -p udp --dport 137 -j REDIRECT --to-ports 1137
   iptables -t nat -A PREROUTING -p udp --dport 138 -j REDIRECT --to-ports 1138

   The UDP forwarding does not work, which affects the NetBIOS name lookups. A workaround is either to add a DNS entry matching the CIFS server name and/or add a static WINS mapping, or add an entry to the clients LMHOSTS file.