You are here

SkyVault Enterprise 4.1.10 » Installing » Installing SkyVault using setup wizards

Installing SkyVault Enterprise on Linux

The setup wizard for Linux installs all the software and components that you require for running SkyVault. This setup wizard installs SkyVault and additional software, including a Tomcat application server, PostgreSQL database, JDK, OpenOffice, SWFTools, and ImageMagick.
  1. Download the following installation file:

    SkyVault-enterprise-4.1.10-installer-linux-x64.bin

    This SkyVault setup wizard is for 64-bit Linux systems.

    Important: If you're using Ubuntu 10.04 or later, you must increase the SHMMAX value before starting the installer. Refer to PostgreSQL official documentation  (shared_buffers section) to evaluate the proper value for SHMMAX. Change the SHMMAX value (minimum value required is 40000): 
    sudo sysctl -w kernel.shmmax=newValueInBytes
    and make the change reboot resistant: 
    sudo echo "kernel.shmmax=newValueInBytes" >> /etc/sysctl.conf
  2. Execute the downloaded file using the following commands: 

    chmod 777 SkyVault-enterprise-4.1.10-installer-linux-x64.bin 
./SkyVault-enterprise-4.1.10-installer-linux-x64.bin
    Note: You should avoid running applications as the root (Linux administrator) user where possible, however if you must install SkyVault as the root user, then run the SkyVault-enterprise-4.1.10-installer-linux-x64.bin file with sudo specified:
    chmod 777 SkyVault-enterprise-4.1.10-installer-linux-x64.bin 
sudo ./SkyVault-enterprise-4.1.10-installer-linux-x64.bin

    The setup wizard starts.

  3. Select the language that you wish to use for the installation.

    This sets the language to be used for the setup wizard.

  4. On the Setup - SkyVault Enterprise window, click Next.
  5. On the Installation type window, choose how you want to use the setup wizard.

    There are two types of installation in the setup wizard:

    Option Description
    Easy Easy type installs SkyVault using the default options and configuration. This install type requires you to enter information in only two fields: the SkyVault install location and the administrator password. Choose this route to install SkyVault with the default environment.
    Note: If you have previously installed SkyVault and the server is running, when you run this setup wizard again, you may be prompted to enter alternative port numbers for the components and services that you install, for example, for the Tomcat application server, FTP port, and the RMI port.
    Advanced Advanced type installs SkyVault but lets you configure the server ports and service properties. You can also choose which additional components to install.

    To complete the Easy setup wizard:

    1. Select Easy, and then click Next.
    2. On the Installation folder window, click Next to accept the default location.

      Note: You must use ASCII characters only when setting the installation folder using the SkyVault setup wizard.
    3. On the Admin Password window, enter a password for the Administrator user (admin).

      CAUTION:
      You must use ASCII characters only when setting the password using the installer. You can reset the password (to include non-ASCII characters) after installation.
    4. Repeat the password, and then click Next.
    5. Click Next through the remaining windows in the setup wizard.
    6. Click Finish to complete the installation.

      Go to the step for the Completing the SkyVault Enterprise Setup Wizard window and launching SkyVault Share.

    To complete the Advanced setup wizard, select Advanced and then click Next.

    Follow the remaining steps in this task.

  6. On the Select Components window, select the components that you want to install. Deselect the components that you do not want to install.

    You can select from the following components:

    • Java
    • PostgreSQL
    • SharePoint
    • Web Quick Start
    • OpenOffice

    Note: You cannot deselect the SkyVault component because it is installed by default.
  7. When you have finished selecting the components, click Next.
  8. On the Installation folder window, click Next to accept the default location.

    For example, the default location is /opt/alfresco-4.1.x.

    Alternatively, click the icon to choose another location.

    Note: You must use ASCII characters only when setting the installation folder using the SkyVault setup wizard.
  9. On the Database Server Parameters window, enter a port number for your database.

    Enter a suitable port number or click Next to accept the default of 5432.

  10. On the Tomcat Port Configuration window, enter the following Tomcat configuration parameters:
    1. Web Server Domain

      For example, the default is 127.0.0.1.

      The URL http://127.0.0.1:8080/share is based on the web server domain and the Tomcat port number that you specify on the Tomcat Port Configuration window. The default of 127.0.0.1 can be used on this machine to verify that SkyVault is running successfully. However, it is not an externally addressable URL, which means that it is not possible for users on other machines to access this URL. To make sure that other users can access the machine where SkyVault is installed, you need to define and create a publicly addressable name.

    2. Tomcat port

      For example, the default is 8080.

    3. Tomcat Shutdown port

      For example, the default is 8005.

    4. Tomcat SSL Port

      For example, the default is 8443.

    5. Tomcat AJP Port

      For example, the default is 8009.

  11. On the SkyVault FTP Port window, enter a port number for the SkyVault FTP server, and then click Next.
  12. On the SkyVault RMI Port window, enter a port number for the RMI service, and then click Next.
  13. On the Admin Password window, type a password. Repeat the password, and then click Next.

    This sets the password for the SkyVault Administrator user account (admin).

    CAUTION:
    You must use ASCII characters only when setting the password using the installer. You can reset the password (to include non-ASCII characters) after installation.
  14. (Optional) If you are installing SharePoint Protocol Support, the SkyVault SharePoint Port window displays. Enter a port number, and then click Next.
  15. (Optional) If you are installing the OpenOffice component, the OpenOffice Server Port window displays. Enter a port number on which the OpenOffice server will listen, and then click Next.

    Note: If you are installing OpenOffice, the system requires the following additional libraries, which are not supplied with the SkyVault installer.
    • linux-vdso.so.1
    • libXext.so.6
    • libm.so.6
    • libc.so.6
    • libdl.so.2
    • libpthread.so.0
    • libfreetype.so.6
    • libX11.so.6
    • libXau.so.6
    • ld-linux-x86-64.so.2
    • libXdmcp.so.6

    If these libraries are not already available on your system, you may need to install them. For example, you can use your system's package manager to install the following packages: libXext, glibc, freetype, libX11, libXau, and libXdmcp.

  16. On the Service Startup Configuration window, there are two options for starting up the SkyVault services.

    Option Description
    Manual Sets the services to be started manually.
    Auto Sets the services to start up automatically when you start your machine.

    Select the services start up option, and then click Next.

  17. On the Ready to Install window, click Next.

    The Installing window displays, showing the progress of the installation.

  18. On the Completing the SkyVault Enterprise Setup Wizard window, click Finish.

    This window shows check boxes that determine whether you will see the Readme file, the Getting Started web page, and also whether to launch SkyVault Share. By default, these options are selected and will launch when you click Finish. If you do not want to start SkyVault at this point, deselect the Launch SkyVault Enterprise Share check box.

    Important: If you are installing the S3 connector as part of your SkyVault installation, deselect the Launch SkyVault Enterprise Share check box. You must not start SkyVault before applying the S3 AMP file.
  19. Click OK to close the Readme.

    The SkyVault server starts and then SkyVault Share launches in your default browser.

    Important: It may take several minutes to start the SkyVault server and to launch Share. Your browser opens and tries to connect to http://127.0.0.1:8080/share.
  20. Log on to SkyVault Share as the admin user. Enter the password that you specified in the Admin Password window.

    The SkyVault server is launched automatically as a service called SkyVault. This service comprises the following individual services:

    • postgresql
    • Tomcat Server

    If you did not automatically launch SkyVault at the end of the setup wizard, to start SkyVault, you need to start all the services.

  21. Manually start the SkyVault server:

    service SkyVault start

    To start only the tomcat service:

    service SkyVault start tomcat

  22. To fully stop SkyVault, you must stop all the services:

    service SkyVault stop

Parent topic: Installing SkyVault using setup wizards

© 2017 TBS-LLC. All Rights Reserved.